Security Link SL150 Manuel d'utilisateur télécharger pdf (Page 8)

Protecting Oracle Database Appliance - Tape Backup with Oracle Secure Backup

Date Synchronization

Ensure you are using Network Time Protocol (NTP) or have all the dates/times between all servers involved in

this configuration in sync.

Oracle StorageTek Tape Configuration

The Oracle StorageTek (STK) SL150 is a modular library system with high capacity and high reliability which can

be attached to a host via fiber channel or SAS. This configuration will utilize a SAS connection. The SL150 is a

bridged library which means robot control commands are channeled through one of the tape drives (no separate

connection for the robot). If this is a new library, follow the instructions in the SL150 documentation to setup the

library. Following the initial setup of the SL150; connect the tape drives to the Oracle Secure Backup

Administrative/Media Server. To connect the SL150 to the Oracle Secure Backup Administrative/Media Server,

use SAS cables to hook each tape drive to the SAS ports on the Sun Server X3-2 HBA card. See figures 2 & 3

below:

Physical Attachments

Figure 2: Rear of Oracle StorageTek SL150 tape library with two LTO SAS attached tape drives.

Figure 3: Rear of Oracle’s Sun Server X3-2 with multi-pronged SAS cable connected to SAS HBA card.

1 2 3 4 5 6 7 8 9 10 11 12 13 ... 30 31

Pas de commentaire

Security Link SL150 Manuel d'utilisateur Page 8