Security Link SL150 Guide de l'utilisateur télécharger pdf (Page 17)

- 17 -

Arming Perimeter Only

(with Entry Delay off)

Using the

INSTANT

Key

Use this key when you are staying home, but would like increased security by

arming pre-selected interior zones.

When armed in INSTANT mode, the system will sound an alarm immediately

if a protected window or door is opened, but you may otherwise move freely

throughout the premises. Anyone entering through the entrance door will cause

an immediate alarm.

Close all protected perimeter windows and doors before arming

(see

Check for Open Zones

section).

A SYSTEM READY display should be present and the green READY indicator

on the keypad should be lit if the system is ready to be armed.

INSTANT

(Security Code)

Enter 4-digit security code, then

press the INSTANT key. Example:

Press 7

2 9 6, then

INSTANT

or, for Quick Arming: If available, simply press the [C]

key

for 2 seconds (this key is

programmed for STAY INSTANT

arming.

STAY

✱

INSTANT

✱

You may exit now

Listen for 3 beeps.

The keypad beeps

three times and displays the INSTANT

message. The

You may exit now

portion of the message disappears when

the exit delay time expires.

Note:

If programmed for your system, you can restart the exit delay at any

time after arming in INSTANT mode by pressing the

✱

READY

key. This is useful

if you wish to open the entry/exit door to let someone in or out after arming the

system without having to disarm the system and then re-arm it again

Place a check in the box at the left if

your installer has programmed this

feature in your system.

* This key

cannot be

used if

programmed

as a Macro

Speedkey)

1 2 ... 12 13 14 15 16 17 18 19 20 21 22 ... 59 60

Commentaires sur ces manuels

Pas de commentaire

Security Link SL150 Guide de l'utilisateur Page 17

Commentaires sur ces manuels

Produits connexes et manuels pour Systèmes de contrôle d'accès de sécurité Security Link SL150