Security Link SL150 Guide de l'utilisateur télécharger pdf (Page 26)

- 26 -

Using Device Commands

General Information

Your system may be set up so that certain lights or other devices can be turned

on or off by using the device command from the keypad. Ask your installer if

this has been done in your system. If programmed for your system, some

devices may activate automatically upon certain system conditions. In this

case, the following commands can be used to override the device activation.

Ask your installer for a full explanation of this feature.

To Activate Devices

Enter security code, then press # + 7 + device number.

INSTANT

(Security Code) (Device Number)

Example: Press 7

2 9 6 then press

, then press

INSTANT

then enter the number representing the device you wish to activate. Ask your

installer for the device numbers assigned for your system.

To Deactivate Devices

Enter security code, then press # + 8 + device number.

CODE

(Security Code) (Device Number)

Example: Press 7

2 9 6 then press

then press

CODE

then enter the number representing the device you wish to deactivate. Ask your

installer for the device numbers assigned for your system.

Device #

Description Device # Description

1 2 ... 21 22 23 24 25 26 27 28 29 30 31 ... 59 60

Pas de commentaire

Security Link SL150 Guide de l'utilisateur Page 26