Security Link SL150 Guide de l'utilisateur télécharger pdf (Page 32)

- 32 -

Testing the System

(To be conducted weekly)

Using the

TEST

Key

The TEST

key puts your system into a TEST mode, which allows each

protection point to be checked for proper operation. The keypad sounds a single

beep every 40 seconds as a reminder that the system is in this TEST mode.

Note:

An alarm message will not be sent to your alarm monitoring company

during the following tests

✱✱✱

SYSTEM READY

✱✱✱

Disarm the system.

Disarm the system and close all protected

windows, doors, etc. The SYSTEM READY

message should be displayed and the green

READY indicator should also be lit.

TEST

(Security Code)

Enter 4-digit security code, then press

the TEST key.

Example: Press 7

2 9 6 then

TEST

Listen.

The external sounder should sound for 2

seconds and then turn off. If the sounder does

not sound,

CALL FOR SERVICE AT ONCE.

Fault zones.

Open each protected door and window in turn

and listen for three beeps from the keypad.

Identification of each faulted protection point

should appear on the display. The display will

clear when the door or window is closed.

Walk in front of any interior motion detectors

(if used) and listen for three beeps.

The keypad should display the identification of

the activated detector.

1 2 ... 27 28 29 30 31 32 33 34 35 36 37 ... 59 60

Commentaires sur ces manuels

Pas de commentaire

Security Link SL150 Guide de l'utilisateur Page 32

Commentaires sur ces manuels

Produits connexes et manuels pour Systèmes de contrôle d'accès de sécurité Security Link SL150