Security Link SL150 Guide de l'utilisateur Page 57

  • Télécharger
  • Ajouter à mon manuel
  • Imprimer
  • Page
    / 60
  • Table des matières
  • MARQUE LIVRES
  • Noté. / 5. Basé sur avis des utilisateurs
Vue de la page 56
Appendix – Macro Key Programming & Usage (Continued)
- 57 -
SPEED LEARN MODE
This prompt will be displayed.
3. Enter the first of the series of desired commands, (it is
not
necessary to
precede any commands with your user code when programming a Macro),
then press/hold the “C” key for at least two seconds to complete the first
command. Pressing the “C” key acts as a terminator at the end of each
separate command, and appears as an “F” in the keypad display.
The keypad beeps to acknowledge your input and displays the command you
entered (followed by the letter “F”).
4. Enter the next command, followed by press/holding the “C” key for at least
two seconds. The keypad beeps to acknowledge this input and displays all
the keystrokes you have entered so far.
5. Repeat until the all the desired commands (up to a total of 16 keystrokes
including the Macro key indications of “F”) have been entered
.
6. To exit from this Macro programming
mode, press/hold the “C” key for at least
two seconds. The display returns to
system status and indicates system is
ready.
Typical Example of Macro Programming
Suppose you want to (1) bypass the two upstairs window zones, then (2) turn on
an exterior porch light, and then (3) arm the security system in the AWAY
mode.
The procedures in the table that follows show you how you would
program a macro function sequence consisting of these three commands:
1.
Bypass zones 2 and 3 (upstairs windows in this example)
2.
Turn a porch light on (relay device operation)
3.
Arm your system in the AWAY mode
(arming command)
Macro Programming Procedure
You must first enter your
4-digit security code
,
press the
[
#
] key,
then
press/hold the
Macro
[
C
]
key for at least two seconds.
✱✱✱
SYSTEM READY
✱✱✱
Vue de la page 56
1 2 ... 52 53 54 55 56 57 58 59 60

Commentaires sur ces manuels

Pas de commentaire