Security Link SL150 Guide de l'utilisateur télécharger pdf (Page 9)

- 9 -

Entry/Exit Delays (cont'd)

Exit Alarms

To minimize false alarms sent to the alarm monitoring company,

your system may have been programmed for this feature. Ask your

installer if Exit Alarm is active for your system.

Exit Alarm Active

Whenever you arm the system, the exit delay begins. If an entry/exit door or

interior zone is faulted when the exit delay ends (e.g., exit door left open), the

system sounds an alarm and starts the entry delay timer. If you disarm the

system before the entry delay ends, the alarm sound stops and the message

CANCELED ALARM

(Alpha keypads) or

CANCELED

(Fixed-word keypads)

is displayed, along with a zone number indicating the faulted zone. No message

is sent to the alarm monitoring company.

To clear the exit alarm condition, the open zone must be made intact (close

window, door, etc.). To clear the display, enter your 4-digit security code plus

OFF key.

If you do not disarm the system before the entry delay ends, and an entry/exit

door or interior zone is still open, the alarm sound continues and an exit alarm

message is sent to the alarm monitoring company. The message

EXIT ALARM

(Alpha keypads) or

(fixed-word keypads) is displayed on the keypad, along

with a zone number indicating the faulted zone. To stop the alarm, the system

must be disarmed (by entering your 4-digit security code and pressing OFF). To

clear the display, enter your security code plus OFF.

An exit alarm also results if an entry/exit door or interior zone is faulted within

two minutes after the end of the exit delay.

1 2 3 4 5 6 7 8 9 10 11 12 13 14 ... 59 60

Pas de commentaire

Security Link SL150 Guide de l'utilisateur Page 9