Security Link SL150 Guide de l'utilisateur télécharger pdf (Page 30)

- 30 -

Security Codes (cont'd)

Single-Button Arming

You can arm the system without the need to enter a security code by pressing a

single key on the keypad, as follows:

Pressing the “A” key arms the system AWAY

Pressing the “B” key arms the system STAY

Pressing the “C” key

arms the system INSTANT

Provided the “C” key is not programmed as a “Macro” key.

Note: The security code must always be used to disarm the system.

To Add a User or Change a User's Code

You must make sequential key depressions for all steps in a procedure within 2

seconds of one another (e.g., perform steps 1, 2, and 3 below with no delay

between steps), or else the entire entry is aborted and must be repeated from

its beginning

CODE

(Master Code)

Enter 4-digit Master code, then press the

CODE

key.

Example: Press 2

0 5 9 then

CODE

(

User Number)

Enter the 2-digit user number

(03–16) for

the user you are adding or changing.

(User's Code)

Execute Macros?

0 = Exit 1 or 2

Enter the new 4-digit security code

for

that user. The following prompt will appear,

accompanied by three beeps.

Enter “0” if you are

not

going to program the “C”

key for a macro function, or you do not want this

user to have the ability to use the macro key. If

you

intend to use the “C” key for this purpose,

enter “1” or “2.” This enables the “C” key for

macro programming later (see

Appendix

for

macro use and programming information).

Note:

If you are using a fixed-

word keypad, this display will

not be present, but the three

beeps will be heard.

1 2 ... 25 26 27 28 29 30 31 32 33 34 35 ... 59 60

Commentaires sur ces manuels

Pas de commentaire

Security Link SL150 Guide de l'utilisateur Page 30

Commentaires sur ces manuels

Produits connexes et manuels pour Systèmes de contrôle d'accès de sécurité Security Link SL150