
- 18 -
Arming Perimeter Only
(with Entry Delay on or Entry Delay off)
Using the
2
AWAY
or 4
MAX
Key
When no one will be staying on the premises, you can arm the system AWAY or
MAX (Maximum).
After arming AWAY, you may leave through the entrance door during the exit
delay period without causing an alarm. The system will sound an alarm (after
the entry delay period) if a protected perimeter door or window is opened, or if
any movement is detected inside the premises. You may re-enter through the
entrance door, but must disarm the system within the entry delay period or else
an alarm will occur
.
After arming MAX, you may leave through the entrance door during the exit
delay period without sounding an alarm. The system will sound an
immediate
alarm (there is no entry delay period) if anyone enters or if any movement is
detected inside the premises. When you re-enter, an immediate alarm will
sound since there is no entry delay. Keep this in mind when using this mode.
Close all protected perimeter windows and doors before arming
(see
Checking for Open Zones section). A SYSTEM READY display will appear
and the green READY indicator on the keypad will be lit if the system is
ready to be armed. If this does not occur, the system is not ready.
+ 7
AWAY
(Security Code) or
4
MAX
Enter 4-digit security code, then press
the AWAY or MAX key.
Example: Press
7
2 9 6,
then
7
AWAY
or
4
MAX
for Quick Arming
AWAY
If available, simply press the [A] key for
2 seconds (this key is programmed for
AWAY arming
)
ARMED
✱✱
AWAY
✱✱
You may exit now
Or
ARMED
✱✱
M
AXIMUM
✱✱
You may exit now
Listen.
The keypad beeps twice, or beeps
continuously if Exit Warning has been
programmed for your system, and displays
the ARMED AWAY or ARMED MAXIMUM
message. The red ARMED indicator also
lights. The
You may exit now
portion of the
message disappears when the exit delay time
expires.
AWAY Mode
MAX Mode
To Arm th
Syste
Commentaires sur ces manuels