Security Link SL150 Guide de dépannage télécharger pdf (Page 56)

SL150 Installation and Setup Guide

10–2

Dynamic Signaling Feature

This control panel features Dynamic Signaling Delay and Dynamic Signaling Priority

message reporting when Long Range Radio is used. This feature, which is programmed in

data fields

✱

and

✱

55,

is designed to reduce the number of redundant reports sent to the

central station.

This feature offers you the following options:

•

Dynamic Signaling Delay

You can select the time the panel should wait for acknowledgment from the first reporting

destination before it attempts to send a message to the second destination. Delays can be

selected from 0 to 225 seconds, in 15-second increments. This choice is made in field

✱

54.

This delay is per message.

•

Dynamic Signaling Priority

You can select the initial reporting

destination for messages, Primary Dialer or Long Range

Radio. This choice is made in field

✱

55.

The chart below will provide a concise explanation of how the Dynamic Signaling feature

functions.

If Priority (

✱

55) is . . And message is . . . Then . . .

Primary Phone No. Acknowledged before delay Message is removed from queue and

(“0” entered) expires no message is sent to LRR.

Not acknowledged before Message is sent to both the Primary

delay expires Phone No. and LRR.

Long Range Radio Acknowledged before delay Message is removed from queue and

(“1” entered) expires no message is sent to primary dialer.

Not acknowledged before Message is sent to both the Primary

delay expires Phone No. and LRR.

Dynamic Signaling Fields:

✱

54 Dynamic Signaling Delay

–

Single digit entry

0–15 times a 15-second delay. e.g., 1 = 15 seconds, 2 = 30 seconds, etc.

Default is “0” (no delay). You must enter “0” for UL installations.

Note:

If ”0” is entered in this field, the control panel will send redundant reports to

both Primary Dialer and LRR.

✱

55 Dynamic Signaling Priority

–

Single digit entry

0 = Primary dialer first; 1 = Long Range Radio (LRR) first.

Default is “0” (primary dialer)

You must enable field

✱

29, OUTPUT TO LONG RANGE RADIO, if this feature is to function.

1 2 ... 51 52 53 54 55 56 57 58 59 60 61 ... 143 144

Commentaires sur ces manuels

Pas de commentaire

Security Link SL150 Guide de dépannage Page 56

Commentaires sur ces manuels

Produits connexes et manuels pour Systèmes de contrôle d'accès de sécurité Security Link SL150